AVR Libc is a Free Software project whose goal is to provide a high quality C library for use with GCC on Atmel AVR microcontrollers. Together, avr-binutils, avr-gcc, and avr-libc form the heart of the Free Software toolchain for the Atmel AVR microcontrollers. They are further accompanied by...
|License: Freeware||Size: 460.8 KB||Download (192): AVR Libc Download|
AVR-Ada aims to make the Ada part of gcc usable on AVR microcontrollers..
|License: Freeware||Size: 16.9 MB||Download (86): AVR-Ada Download|
CDK4AVR stands for Cross Development Kit for Atmels AVR RISC processor serie and should support your development with a comprehensive Assembler and C development environment for even this processor familie under Linux. It will present only free of fee tools, so you can use it without risks....
|License: Freeware||Download (89): AVR Cross Development Kit Download|
AVR-Eclipse was specially designed as a plugin for the Eclipse Integrated Development Environment which adds toolchain support.
This is done through CDT, for the GCC compiler for the Atmel AVR series of microcontrollers, and adds a toolbar button to allow quick upload of produced code to a...
|License: Freeware||Download (27): AVR-Eclipse Download|
revava is a single pass disassembler that reads in a file containing a program intended for an Atmel AVR microcontroller and outputs assembly code that can be input to an avr assembler. The output of revava contains assembler mnemonics where possible and dc.W declarations where no mnemonic...
|License: Freeware||Size: 25.6 KB||Download (291): revava Download|
vAVRdisasm is an AVR program disassembler. The project supports all 136 AVR instructions as defined by the Atmel AVR Instruction Set, revision 0856E-AVR-11/05. This single-pass disassembler can handle Atmel Generic, Intel HEX8, and Motorola S-Record formatted files containing valid AVR program...
|License: Freeware||Size: 9.22 KB||Download (454): vAVRdisasm Download|
AVRTimerCalculator is a small, easy to use, handy application specially designed to help you get the settings for an AVR-timer right.
So, if you are an AVR-timerfan take AVRTimerCalculatorfor a spin and see how it goes.
|License: Freeware||Download (73): AVRTimerCalculator Download|
Spark Loader is a boot loader for AVR microcontrollers, it is used for programming flash and EEPROM using a serial link (USB to Serial converters can be used) between your computer and the microcontroller through any free COM (or USB) port. Spark Loader consists of two parts:
1. On - chip boot...
|License: Freeware||Size: 12.23 MB||Download (31): Spark Loader Download|
IMAVR is Atmel AVR 8-bit RISC chip emulator for UNIX. You can run your code before programming to chip. Embedded simple debugger and disassembler. Emulate wide range of AVR chip, wide range of their modules: EEPROM,USART, timers and so on.
Platforms: Mac, BSD, Linux
|License: Freeware||Size: 296.57 KB||Download (31): Atmel AVR 8-bit RISC emulator for UNIX Download|
AVR-Eclipse is a plugin for the Eclipse IDE which adds toolchain support, through CDT, for the gcc compiler for the Atmel AVR series of microcontrollers, and adds a toolbar button to allow quick upload of produced code to a target device.
Platforms: Windows, Mac, Linux
|License: Freeware||Size: 2 MB||Download (28): AVR Plugin for Eclipse Download|
8-bit AVR microcontrollers are getting more and more popular chips for many proposal. They utilise the AVR RISC Architecture, have more than one hundred instructions, most of them executes at single clock cycle. They have also nice peripheral devices like 8/16 bit timer, analogue comparator, PWM,...
Platforms: Windows, Mac, *nix, C/C++, BSD Solaris
|License: Freeware||Download (57): ATMEL AVR Simulator Download|
This app allows you with your iPhone / iPod touch to connect to a AVR-Net-IO Board, read and display the measured values from the analog-digital converters with highest precision. Using this app simplifies to display values from this marvellous piece of hardware AVR-Net-IO in your application...
|License: Freeware||Size: 4.7 MB||Download (8): AVR-Net-IO Download|
AVR simulator is a powerful application where you can write AVR assembly language program, compile, debug and run it. The main application screen shows all AVR microcontroller general-purpose working and I/O registers status. It also shows mnemonics of the last executed instruction and mnemonics...
|License: Shareware||Cost: $3.99 USD||Size: 10.3 MB||Download (7): AVR Simulator DIY Download|
This tool let you setup the SPI unit of a generic AVR microcontroller. You can email the configuration and, in a future version, you will be able to generate C and ASM code. Requirements: iOS 3.0 or later. Compatible with iPhone, iPad, and iPod touch.
|License: Freeware||Size: 102.4 KB||Download (7): AVR SPI Download|
Mit der offiziellen Abfall App der AVR Kommunal GmbH stehen Ihnen fur alle 54 Gemeinden im Rhein-Neckar-Kreis die Abfuhrtermine fur Restmull, BioEnergieTonne, Grune Tonne plus, Glasbox, Sperrmull-/Altholz-, Elektrogerate-/Schrott- und Altkleider-/Schuhesammlung, Grunschnitt- sowie mobile...
|License: Freeware||Size: 921.6 KB||Download (7): AVR Abfall Download|
Micro-IDE is a free C compiler for AVR microcontrollers, this compiler is intended to work with AVR micro controllers from ATMEL. The principle is to create assembler code from C code using micro-IDE studio and create assembler hex file to be loaded to the AVR chip using the free avr studio from...
|License: Freeware||Size: 1.9 MB||Download (636): Micro-IDE Download|
PonyProg is a serial device programmer with a user friendly GUI framework available for Intel Linux and Windows. PonyProgs purpose is being able to read from and write to most serial devices. At the moment it supports I▓C Bus, Microwire, SPI eeprom, the Atmel AVR, and Microchip PIC micro....
|License: Freeware||Size: 696.32 KB||Download (482): PonyProg Download|
avrLab is an IDE (Integrated Devlopment Environment) for the AVR?*A* family of microcontroller from Atmel?*A* Currently it features an advanced editor with syntax highlighting for assembly language. tavrasm is supported as macro assembler and uisp is used for communication with the AVR?*A*....
|License: Freeware||Size: 30.72 KB||Download (116): avrLab Download|
NanoVM is a tiny (less than 8 kB of code including simple native classes and a bootloader) implementation of the Java VM. NanoVM project currently runs on Linux and the AVR microcontroller family. Unix/Linux is supported as the main development and testing platform, whereas the VM is primarily...
|License: Freeware||Size: 419.84 KB||Download (95): NanoVM Download|
LCD2USB is a open source/open hardware project. LCD2USB was meant to be cheap and to be made of easily available parts. It is therefore based on the Atmel AVR Mega8 CPU and does not require any difficult to obtain parts like separate USB controllers and the like. The total cost (without display...
|License: Freeware||Size: 266.24 KB||Download (130): LCD2USB Download|